Log Splitter Build Kit: 16 GPM Pump, Coupler, Mount, Bolts, For Huskee, Speeco, etc Replacement or "Build it Yourself"

Brand NEW 16 GPM Log Splitter Pump / 2 Stage Gear Pump

This is same pump used by SpeeCo, Champion, Oregon, MTD and many others. Use as a replacement or a "build it yourself" splitter project

The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine.  Excellent for use on log splitters, 90% efficient.

Recommended 8-12hp engine

Specifications:

• 16 GPM @ 3600RPM.
• Shaft: ½” (key included)
• Inlet: 1" diameter
• Outlet: ½” NPT
• Dimensions: 5.5”L  x  3”H  x  4”W
• Minimum HP: 8
• RPM Requirement: 3600 for 11 GPM, pump can be operated with lower RPM's
• For use with open center hydraulic systems only
• 1st Stage: 13 GPM@650 PSI
• 2nd Stage: 3 GPM@2500 PSI
• Maximum Pressure: 4000 PSI
• Bolt Circle: 2.83in.
• 4 Bolt Holes Spaced 2in. on Center
• Bolt Hole Diameter: .344in.
• Rotation: Clockwise

Medium Pump Mount: 

• Length: 5-1/4"
• Pump Side: 2-3/4" bolt circle, 2" square on center
• Engine Side: 5" bolt circle, 3-1/2" square on center
• Holes drilled for 5/16" bolts
• Cast iron construction
• Compatible with most 8-15HP gas engines  

Lovejoy Coupler:

- The kit comes with two LO90 coupler halves and one rubber spider to connect the pump to your engine.  Choose your engine crankshaft size from the drop-down menu, 5/8", 3/4" or 7/8", 1" or 1-1/8"

 Bolts, Lock Washers, Nuts

• Kit comes with the necessary fasteners to bolt the mount and pump together.  You'll supply your own engine mounting bolts