Log Splitter Build Kit: 16 GPM Pump, Coupler, Mount, Bolts, For Huskee, Speeco, etc Replacement or "Build it Yourself"

ToolTuff Direct


Brand NEW 16 GPM Log Splitter Pump / 2 Stage Gear Pump

This is same pump used by SpeeCo, Champion, Oregon, MTD and many others. Use as a replacement or a "build it yourself" splitter project

The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine.  Excellent for use on log splitters, 90% efficient.

Recommended 8-12hp engine


  • 16 GPM @ 3600RPM.
  • Shaft: ½” (key included)
  • Inlet: 1" diameter
  • Outlet: ½” NPT
  • Dimensions: 5.5”L  x  3”H  x  4”W
  • Minimum HP: 8
  • RPM Requirement: 3600 for 11 GPM, pump can be operated with lower RPM's
  • For use with open center hydraulic systems only
  • 1st Stage: 13 GPM@650 PSI
  • 2nd Stage: 3 GPM@2500 PSI
  • Maximum Pressure: 4000 PSI
  • Bolt Circle: 2.83in.
  • 4 Bolt Holes Spaced 2in. on Center
  • Bolt Hole Diameter: .344in.
  • Rotation: Clockwise

Medium Pump Mount: 

  • Length: 5-1/4"
  • Pump Side: 2-3/4" bolt circle, 2" square on center
  • Engine Side: 5" bolt circle, 3-1/2" square on center
  • Holes drilled for 5/16" bolts
  • Cast iron construction
  • Compatible with most 8-15HP gas engines  

Lovejoy Coupler:

- The kit comes with two LO90 coupler halves and one rubber spider to connect the pump to your engine.  Choose your engine crankshaft size from the drop-down menu, 5/8", 3/4" or 7/8", 1" or 1-1/8"

 Bolts, Lock Washers, Nuts

  • Kit comes with the necessary fasteners to bolt the mount and pump together.  You'll supply your own engine mounting bolts

Check Out Our Brands!